Good access control starts with a list of people, not a list of products. Once you know who needs to get in, when, and through which door, choosing smart locks, garage door controllers, and the rules that tie them together becomes a practical exercise. This guide covers how to plan access for owners, family, staff, guests, and vendors, what to check before buying hardware, and how to hand access over cleanly when people or owners change.
Who needs access, and what kind?
Most properties have four or five distinct groups, and each one needs a different kind of access. Writing them down first prevents the most common problem we see: one shared code that everyone knows and nobody can revoke without changing it for everyone.
| Person or role | Typical access | Useful settings |
|---|---|---|
| Owners and family | Any time, every door | Full app access, personal codes, notifications on key doors |
| Household staff (housekeeper, nanny, caretaker) | Set days and hours | Recurring schedule, personal code, activity history |
| Guests and short stays | Arrival to departure | Temporary code that expires on its own |
| Vendors (pool, pest control, AC service, cleaners) | A window on service days | Recurring or one-time code, ideally one door only |
| Property managers | Broad access across units | Admin rights in the app, never the owner’s personal login |
| Commercial staff | Opening and closing shifts | Role-based codes tied to schedules, removed on the last day of work |
Two rules make this table work in practice. First, give each person or company their own code or app invitation, so history means something and removal affects only that person. Second, decide which doors each role actually needs. A pool service may only need the side gate or the garage, not the front door.
Illustrative example: A Coral Gables family has a housekeeper on Tuesdays and Fridays, a pool technician on Wednesdays, and grandparents who visit often. The plan gives the grandparents permanent codes, the housekeeper a code active 8 a.m. to 4 p.m. on her two days, and the pool technician a code that works only at the garage keypad on Wednesday mornings. When the pool company changes, one code is deleted and nothing else is touched.
How do scheduled codes and permissions work?
Most current smart locks let the owner create codes or app access that are permanent, recurring on a schedule, or temporary with an end date. Yale’s Access app, for example, describes sharing permanent, scheduled, or temporary access, and other major brands offer similar options under different names.
The details differ by brand and model, so these are the questions we answer for each lock before a plan is final:
- How many codes the lock can store, and whether schedules are kept on the lock itself or enforced by the app or hub.
- Whether codes created at the keypad behave the same as codes created in the app. On some models they don’t, so we pick one method and use it consistently.
- Who can add or remove users. Some apps separate owners, managers, and guests, with guests unable to see history or invite others.
- Whether the lock will be managed by its own app, by a hub or automation platform (Z-Wave, Zigbee, Matter, or a brand bridge), or both. Mixing management tools can create conflicts, such as codes that exist in one place and not the other.
Once codes are tied into a broader automation platform, access can trigger other actions. A housekeeper’s code at the side door can turn on hallway lights, or the “away” routine can check that every lock reports locked. We decide those connections during design so the system stays understandable for the people who live or work there.
What does activity history show, and where are its limits?
Activity history (sometimes called an audit trail or activity feed) records lock and unlock events and, when possible, which code or user did it. Yale describes its app feed as showing who had access and when, with real-time notifications. That is genuinely useful for confirming that a vendor arrived or that the last person out locked up.
It has limits worth knowing before you rely on it:
- Connection matters. Many locks only upload history when they can reach Wi-Fi, a bridge, or a phone nearby. A lock out of range of its bridge may show gaps or delayed events.
- Shared codes hide identity. If three vendors share one code, the history can only say that code was used.
- Physical keys are anonymous. A key turn is usually logged as a manual unlock with no name attached, if it is logged at all.
- Retention varies. How far back history goes depends on the app and sometimes on a subscription.
For a property manager, history can support routine questions like “did the cleaner come today.” It is not a substitute for cameras where you need visual confirmation, which we cover in our guide to integrating cameras and video doorbells.
Will a smart lock fit your door?
A standard smart deadbolt fits most residential doors, but only if the door is prepared to standard dimensions and aligned well. Schlage’s door prep checklist lists the usual measurements:
| Measurement | Standard value |
|---|---|
| Door thickness | 1-3/8 to 1-3/4 in |
| Backset (door edge to center of the large hole) | 2-3/8 or 2-3/4 in |
| Cross bore (large hole through the door face) | 2-1/8 in diameter |
| Edge bore (where the bolt passes through the door edge) | 1 in diameter |
| Bolt throw into the frame | Room for the deadbolt to extend 1 in into the frame |
If the backset or door thickness doesn’t match, Schlage notes you may need a carpenter or a replacement door. A few other situations come up often in South Florida:
- Impact-rated and multipoint doors. Some impact-rated entry doors use multipoint or mortise hardware that a standard retrofit deadbolt won’t fit. These need a lock designed for that hardware, or a different approach.
- Doors that stick. A motorized deadbolt needs the bolt to slide freely. If the door has to be pushed or lifted to lock, the motor will strain and drain batteries. Humidity and seasonal movement can make an older door bind, so alignment is checked before installation.
- Double-cylinder deadbolts. These need a key on both sides. Most smart deadbolts are single-cylinder with an interior thumbturn, which changes how the door works from inside.
- Gates and side doors. Outdoor gates usually need hardware rated for exposure, and salt air near the coast is hard on exposed metal and electronics. We check the manufacturer’s rating for outdoor use before suggesting a lock for a gate.
We also confirm how the lock talks to the rest of the system. Wi-Fi locks connect directly but often draw more battery. Bluetooth-only locks may need a bridge for remote access. Z-Wave, Zigbee, and Thread locks need a compatible hub or border router. We verify the exact model against the platform before promising integration.
How does garage door control work, and what about safety?
Most smart garage control works by adding a controller to an existing opener, or by using an opener that has connectivity built in. The controller reports whether the door is open or closed and lets you operate it from an app or an automation. Chamberlain’s myQ Smart Garage Control, as one example, sends alerts when the door opens, closes, or is left open, and lists compatibility with major opener brands made after 1993 that have standard safety sensors.
Safety requirements shape how remote closing works:
- Working safety sensors first. The photo eyes near the floor that reverse the door when something crosses the beam are essential. We test them before connecting any controller, and we don’t install remote control on an opener whose sensors are missing or bypassed.
- Warning before a remote close. Chamberlain’s support FAQ explains that its hub is required by the UL 325 safety standard to alert bystanders when the door is about to close remotely, with beeps and flashing, and that this feature cannot be disabled. Other controllers have similar requirements. We treat those warnings as part of the design.
- Placement and signal. Chamberlain recommends mounting the hub so its light is visible inside the garage and having a Wi-Fi signal of about 75% or better in the garage. Garages are often the weakest Wi-Fi spot in a home, which is one reason we look at the network behind your automation during the assessment.
Automations such as “close the garage at 10 p.m. if it’s open” are popular, and they work well when they notify someone and respect the opener’s safety behavior. If the door fails to close because a sensor detected something, the right outcome is an alert to a person.
How do you hand over access securely?
A clean handover removes every way a previous person could get in and confirms that the new owner or manager controls the accounts. We recommend writing this routine down once and repeating it whenever a tenant leaves, staff changes, or the property is sold.
- Delete codes and app invitations for anyone who no longer needs access. Remove them by name; don’t just change the master code.
- Confirm who holds the owner role in each app (lock, garage, hub). If a previous owner, builder, or installer still holds it, transfer it before closing.
- Clear the garage opener’s memory of old remotes and keypad codes, then re-pair the remotes you are keeping. The opener’s manual explains how.
- Change Wi-Fi passwords if previous occupants knew them, and update the devices that use them.
- Update recovery details (email, phone) and turn on two-factor authentication where the app offers it. The FTC recommends unique passwords and two-factor authentication for connected devices.
- If a lock is being removed or the property sold with devices staying, factory reset or transfer them following the manufacturer’s instructions, so no old account keeps control.
Illustrative example: A property manager in the Keys oversees a vacation rental that is sold. Before closing, the manager removes all guest and vendor codes, transfers ownership of the lock and garage app accounts to the buyer’s email, clears old garage remotes from the opener, and hands the buyer a one-page list of every device and account. The buyer starts with access that only they control.
What changes for condos and commercial spaces?
Condos and commercial properties add rules from someone other than the owner. Plan for those early to avoid installing hardware that must later come off.
Condos. Many associations regulate what can be installed on doors facing common corridors, including hardware finish and style. Doors in shared corridors may also be fire-rated, and modifications to fire-rated doors are often restricted. We ask for the association’s rules and get approval in writing before ordering hardware. For more on these constraints, see our article on condo and retrofit automation.
Offices, retail, and hospitality. Commercial doors often carry fire code and accessibility requirements, existing master key systems, and sometimes electrified hardware that needs low-voltage wiring and coordination with a fire alarm system. That kind of work is handled by appropriately licensed trades and the property’s door hardware provider where required. For smaller spaces, a set of smart locks with schedules tied to staff roles often covers opening, closing, and after-hours vendors. For larger sites, dedicated commercial access control is usually a better fit, and we can help you scope it.
What a smart lock does not do
A smart lock changes how access is managed. It does not make a door stronger, and it can’t guarantee that a property is secure. The frame, strike plate, glass near the lock, and the door itself still matter. Batteries need replacing, apps change, and remote features depend on power, network, and the vendor’s service. Planning for those realities is part of a good access design, and it’s why we document every device and account at handover.
How AppxSmart can help
The SwayPC team behind AppxSmart starts by mapping who needs access and checking the doors, openers, and network you already have. We then recommend locks and garage controllers that fit those doors and your chosen platform, install and configure codes and schedules, and leave you with documentation and a handover routine. Learn more on our locks and access service page, and see our support and maintenance options if you’d like help managing codes over time. When you’re ready, request a free consultation and we’ll contact you as soon as possible.
Questions people ask
Can a smart lock replace the keys completely?
Most residential smart deadbolts still include a physical key cylinder as a backup, and we recommend keeping a key in a safe place. Batteries run down, phones get lost, and a lock's app or cloud service can have an outage.
Do smart locks work when the internet is down?
Keypad codes stored on the lock usually keep working because they are checked by the lock itself. Remote unlocking, new code creation from away, and notifications usually need the lock's bridge or Wi-Fi connection and internet access. Behavior varies by model, so we verify the exact lock before promising how it behaves offline.
Can you connect a smart controller to an old garage door opener?
Only if the opener has working safety sensors and is on the controller maker's compatibility list. Chamberlain, for example, lists compatibility with major opener brands made after 1993 that have standard safety sensors. If an opener lacks working entrapment protection, we recommend repairing or replacing it first.